When microwave sensors detect the motion of vehicles or humans, it comes under a fully automatic system. And when opening or closing is initiated from a manual switch or remote control, then it comes under semi-automatic systems.

So, let us talk about some of the automatic systems that are safer and beneficial for homeowners.

Automatic garage door

A garage door opener is one of the most overlooked aspects of any garage. There are so many types of automatic garage door openers such as chain drive, belt drive, screw drive, and direct drive. You can activate the movements of automatic garage doors via remote control and it is one of the most convenient things about these doors.

Moreover, modern garage doors are usually installed with automatic security lights. Whenever the door will open, the lights will automatically turn on. Another feature of an automatic garage door is the Wi-Fi integration as you can handle and operate your garage door from anywhere at any time.

Automatic gate opener

When you get access to a secured area, automatic gates are the reason for this. Automatic gates have two components, i.e., gate and gate operator. The gate is the physical object that blocks the gate opening.

And the gate operator is a technical machine that helps to move the gate in and out of the gate opening. The types of automatic gate opener are slide gates, cantilever gates, swing gates, vertical lift gates, vertical pivot lift gates, Bi-Folding gates, and barrier arm gates.

Security Bollards

Security bollards have many uses and they are mainly used as physical and visual barriers both. They provide protection to lives and properties while creating a controlled traffic setting. Also, you will get security bollards with different shapes and sizes along with different features and conditions.

However, operators can also be controlled from somewhere else by the remote-controlled system from a security post. All the security bollards are built with strong materials and are installed with superior quality and footings.

You can control them with any access system and have many safety features such as strip lights and emergency operations.

The post All You Need To Know About Entrance Automation appeared first on Al Bab Automation | Dubai | UAE.

But, in the case of a garage door, it is a big matter of language as it is not so easy. There are multiple ways to program your garage door to connect it remotely with your car. It can be done either with a remote or without a remote. So, let us learn about this in detail.

With a remote

It is very easy to program your garage door with a remote, but you should know in advance that alterations and differences happen depending on the specific type of remote you have. So, below is the process to program it with remote.

• Somewhere in your garage door opener look for a “learn” button. It is the actual machine that is attached to the door in your garage. This may be possible that the button you have might be of a different name but it should be near the antenna radio receiver.
• Most of the “learn” buttons have LEDs near them which indicates when they are going to be pressed or receive commands.
• After locating the “learn” button, you have to press and release it. It will put the control unit of the opener into a programmable state. Now, it will be open to a new radio frequency.
• After this, you will have to take your remote which should have at least two buttons to open and close the garage door.

Now, with this remote, try to open the door and once the garage door opens, the LED light should turn off.

Without a remote

The process to connect your garage door opener with your car without a remote is somehow similar to the process noted above but with a couple of differences.

• First, you will have to find the control panel of your garage door opener. It can be located above the driver’s seat  or somewhere near the control buttons of your car.
•  So, your control panel might have some different buttons but it should be somehow similar to “program”.
•  Push and hold that button for a few seconds until the light flashes.
•  The remote should accept the new keycode command and should automatically link to your door.
•  Use the program button on the control box to try the garage door.

In all, if you are connecting your garage door opener with your car, it will be quick and the easiest process which will even save your time.

The post How To Program A Garage Door Opener To Your Car? appeared first on Al Bab Automation | Dubai | UAE.